Edit Content

Stay Tuned With Us

Keep Connected & Lets Get In Touch With us

Our Address

Lot 15, Noi Hoang Industrial Complex, Noi Hoang Commune, Yen Dung District, Bac Giang Province, Vietnam.


+84 359 572 195

Email Address


+84 359 572 195

furniture factories

How to deal with waste gas from furniture factories?

Share this post :

Exhaust gas from furniture factories usually includes volatile organic compounds (VOCs) and other pollutants generated during painting, drying, cutting, processing, etc. The method of treating waste gas from furniture factories should be selected according to factors such as the characteristics of the waste gas, the amount generated, and local regulations.

Common ways to deal with furniture factory exhaust:

  • VOCs treatment equipment: For the generated volatile organic compounds (VOCs), VOCs treatment equipment can be used, such as activated carbon adsorbers or catalytic oxidation devices. These devices can effectively capture and degrade VOCs, reducing their emissions.
  • Ventilation and exhaust system: Install a ventilation and exhaust system to guide exhaust air from indoors to outdoors. This helps discharge pollutants into the air, reducing indoor air pollution.
  • Enclosed processing and coating equipment: The use of enclosed processing and coating equipment can minimize the emission of volatile organic compounds. These devices can effectively seal off the source of exhaust gas generation and prevent exhaust gas from escaping.
  • Flue gas purification facilities: For the exhaust gas generated during the drying process, flue gas purification facilities, such as wet scrubbers or dry filters, can be used to remove particulate matter and pollutants.
  • Waste gas recovery and energy recovery: Some furniture factories can use waste gas recovery technology to recover and reuse the energy or heat in the waste gas to reduce energy consumption and emissions.
  • Regulatory Compliance: Ensure that exhaust gas treatment solutions comply with local environmental regulations and emission standards. Furniture factories are required to obtain environmental permits and regularly monitor and report exhaust emissions.
  • Monitoring and Maintenance: Install monitoring equipment to track the quality and concentration of exhaust emissions to detect problems and take corrective action in a timely manner. Regular equipment maintenance and maintenance is also very important.
chemical scrubbers

The optimal exhaust gas treatment method will depend on the composition of the exhaust gas, the volume of emissions, economic feasibility and regulatory requirements. When designing an exhaust treatment plan, it is recommended to cooperate with a professional environmental engineer or consultant to ensure that exhaust emissions are properly treated to protect the environment and human health.

The main source of exhaust gas in furniture factories

The main exhaust air sources of furniture factories usually involve production processes such as wood processing, painting and drying. The following are the main sources of exhaust air that furniture factories may produce:

  1. Painting exhaust: Furniture manufacturing often involves the painting and spraying of furniture, which release volatile organic compounds (VOCs) and other pollutants that impact indoor air quality.
  2. Drying exhaust: During the manufacturing process, paint or coatings need to be dried. The fumes produced during the drying process may contain VOCs, particulate matter and other chemicals.
  3. Cutting and Processing Exhaust: Wood cutting and processing may generate exhaust gases such as particulate matter, wood chips and organic compounds.
  4. Adhesive off-gassing: Adhesives used in furniture manufacturing may emit VOCs.
  5. Exhaust gas from gas combustion: Some furniture factories may use gas as an energy source, and exhaust gases such as carbon monoxide (CO) and nitrogen oxides (NOx) may be produced during the combustion process.
  6. Wood drying exhaust: In some cases, wood needs to be dried, which may generate moisture, VOCs and other volatile substances in the exhaust.
  7. Odor and gaseous emissions: Apart from the main chemical components, there may be odors and other gaseous emissions during furniture manufacturing, which also need to be dealt with properly.
furniture spray paint

For these exhaust sources, furniture factories should carry out appropriate exhaust control and treatment to ensure the protection of indoor air quality, environment and employee health. This may include the use of exhaust and ventilation systems, installation of pollution control equipment, use of closed processes, compliance monitoring, etc. When developing an exhaust gas treatment strategy, it is recommended to work with an environmental professional to ensure the proper method is selected and local regulations are followed.

Can furniture factories use PP ducts for ventilation?

Yes, furniture factories can use polypropylene (PP) ducts for ventilation. Polypropylene is a synthetic material with several advantages that make it widely used in ventilation systems.

Furniture factory ventilation duct

Here are some advantages and considerations for using PP duct:


  • Good corrosion resistance: Polypropylene has good resistance to many chemicals and corrosive gases, so it is suitable for treating some corrosive components that may be contained in exhaust gas.
  • Lightweight and easy to install: PP air duct is relatively light and easy to carry and install. Its connections are usually made using hot-melt welding or sealing gaskets, making the installation process relatively simple.
  • Low thermal conductivity: PP material has low thermal conductivity, which can reduce the conduction of heat in the pipe and help maintain the temperature in the ventilation system.
  • Low temperature resistance: PP also has good performance in low temperature environment and is not easy to be brittle.
  • Good sealing: The sealing of the PP air duct connection is usually better, which helps to reduce air leakage and pollutant leakage.
  • Relatively low cost: Compared with some other materials, PP duct generally has a relatively low cost.


  • Temperature limitation: PP materials have a limited temperature range, and it is usually more suitable to work in a lower temperature range. High temperature environment may affect the performance of PP.
  • Application environment: It is necessary to consider the nature of the exhaust gas and pollutants generated during the furniture manufacturing process to ensure that the PP duct is suitable for treating these exhaust gases.
  • Regulatory Compliance: Ensure selected materials and ventilation systems comply with local environmental regulations and emission standards.
  • Maintenance and cleaning: PP air duct needs regular maintenance and cleaning to maintain its good ventilation performance.

To sum up, PP air duct can be an effective choice to deal with exhaust gas from furniture factories, but before selection and application, it is recommended to cooperate with ventilation engineers or professional consultants to ensure that the selected ventilation system and materials can meet the specific requirements of furniture factories. needs and environmental requirements.

Maybe You Like

Wet scrubber mist eliminator

Wet scrubber mist eliminator

Wet scrubber mist eliminator is a critical component in air pollution control systems, specifically designed to remove fine mist and droplets from gas streams after…

How does a fume scrubber work?

How does a fume scrubber work?

Fume scrubber, also known as a gas scrubber or wet scrubber, is a device used to remove pollutants from industrial exhaust streams. The primary function…

What is a wet scrubber?

What is a wet scrubber?

Wet scrubber is a device used for pollution control and air purification. It is mainly used to remove particulate matter and gaseous pollutants in industrial…

Contact Me on Zalo

Leave a Message For Us